Skip to main content
All CollectionsAramax PowerTroubleshooting Guideline — Aramax PowerARAMAX Power — Battery Charging - 10X Red Blinks
4# Cause: Other circuit or electronic issue
4# Cause: Other circuit or electronic issue

With a full charge (around 5 hrs) until the white LED signal goes off, the battery can support around 25ml liquid consumption.

O
Written by Ondřej
Updated over 6 years ago

Actions: Plug in a certified USB cable which you know works and check if there is a normal charging signal (3X red blinks, then red/white holds).
​
If there is no normal charging signal, the port or pins connecting the PCBA may be damaged. Please contact ARAMAX for further assistance. 

1# Cause: Defective cable
2# Cause: Low-quality charger
3# Cause: Loose port

Did this answer your question?