Skip to main content
All CollectionsAramax PowerTroubleshooting Guideline — Aramax PowerARAMAX Power — Battery Charging - 10X Red Blinks
3# Cause: Loose port
3# Cause: Loose port

With a full charge (around 5 hrs) until the white LED signal goes off, the battery can support around 25ml liquid consumption.

O
Written by Ondřej
Updated over 6 years ago

Actions: Check the USB charging port to see if it's physically loose; if there is any movement with the port then this is the likely issue. Please seek a replacement from your place of purchase during the warranty period or contact ARAMAX for further issues.

Tips: Loose port can be caused by device failing during charging. Please try to stabilize the POWER device.

1# Cause: Defective cable
2# Cause: Low-quality charger
4# Cause: Other circuit or electronic issue

Did this answer your question?